What Real Teams Are Doing with Pressable MCP

From incident response to daily maintenance to security remediation: here’s how seven teams are putting Pressable MCP to work.

One person managing 120+ sites. A team of 25 running operations that would normally require enterprise DevOps headcount. A two-person response that cleaned up 45 compromised sites in days instead of months. A 200-site portfolio audited in under 45 minutes. These are what lean teams are pulling off when their hosting infrastructure is something their AI can reach into and operate. Here’s what seven of those teams are doing with Pressable MCP.

Getfused: A Fleet-Wide Incident Resolved From One Terminal Session

Getfused is a Boston-based agency of 25 people managing more than 170 live WordPress sites for clients in sports, financial services, and healthcare. When a third-party email service failure knocked out outbound email across the majority of their portfolio simultaneously, Infrastructure Administrator Zachary Batte needed to move fast across a lot of sites.

He handled the entire triage and remediation from a single terminal session. Using Pressable MCP inside Claude, he scanned activity logs across more than 170 sites in a single pass to isolate the cause, pushed an updated configuration via WP-CLI fleet-wide, deployed a temporary plugin to bulk-resend hundreds of blocked emails, and removed it cleanly once they were through. What would have been a multi-day manual crisis became an afternoon fix.

“If I’d had to do this by hand without the MCP server, I wouldn’t have even tried. It would have been too time-consuming,” Batte said.

Beyond the incident, the team has built a custom interface on top of Pressable’s APIs and MCP to give the whole team fleet-wide plugin inventory and version status from one place. A team of 25 is now running operations that would typically require a much larger DevOps organization.

[Read the full Getfused case study →]

Bay Area Web Solutions: One Person. 120+ Sites. An SEO Ranking Turnaround.

Jason Garvey has run Bay Area Web Solutions since 2005, handling web design, hosting, and local marketing for clients across the San Mateo Peninsula, solo, with a small contractor bench. Managing 120+ sites without a team means every hour of manual work is an hour not spent on client strategy.

Jason was already using Claude for SEO analysis with SE Ranking connected via MCP. The problem: Claude had no way to reach into the sites themselves. When he mentioned to Claude that he hosted with Pressable, Claude surfaced that Pressable had an MCP server available. He connected it, and the scope of what was possible shifted.

The clearest result came from an SEO project for Los Altos Christian Schools, a private school with poor visibility for its primary search terms. Using Claude with SE Ranking MCP for keyword strategy and Pressable MCP for site access and performance diagnostics, Jason moved the school from outside the top 10 to third place organically and landed them in the local map pack, a result that hadn’t been achievable before.

Pressable MCP also became the safety net that lets Jason trust Claude to operate with more autonomy. It handles blog publishing directly to his Pressable-hosted sites, pulls and interprets NGINX access and PHP error logs, verifies that contractor work landed, and clears edge cache after changes.

“Pressable MCP takes information that would be unreadable to me and crunches it into something I can act on,” Garvey said.

[Read the full Bay Area Web Solutions case study →]

OWUP: Legacy POS Debugging in Under an Hour

OWUP is a Norwegian and Swedish agency specializing in high-end WooCommerce builds for the watch and jewelry industry. Their clients deal with 20,000+ SKUs, constant price fluctuations driven by the global gold market, and POS systems that are decades old. Debugging sync errors between those systems and a modern WooCommerce front-end used to mean days of manual log review and waiting on specialized developers.

When a watch retail client had a metadata corruption issue that had persisted for years, OWUP Managing Director Ole Straume Andersen connected Claude to the database through Pressable MCP. Claude matched the database against a POS data dump, diagnosed the issue, and patched it in under an hour.

The efficiency gains have built from there. OWUP now does speed optimizations for three sites in the time it used to take to do one. They’ve rebuilt their agency reporting using Pressable data piped through n8n and Slack, surfacing which clients need outreach and where they can add value, delivered as monthly automated reports. Junior team members can use MCP to get technical answers that previously required escalating to senior staff.

“It’s night and day. With Pressable MCP, we can move so much faster with information. It has truly made us realize we can double down on being experts in our field,” Andersen said.

[Read the full OWUP case study →]

Spotzer Digital: 45 Compromised Sites, Cleaned Up in Days

Spotzer Digital is a white-label digital solutions company with offices in Amsterdam, Australia, and Manila, building and managing WordPress sites at scale for enterprise partners including Orange, KPN, and Telstra across 30+ countries. When a plugin vulnerability resulted in 45 compromised sites, their WordPress team lead used Pressable MCP with Claude to build a structured cleanup workflow that handled the heavy lifting automatically.

Before MCP, the standard approach was writing shell scripts, testing them manually, and running them one site at a time. At this scale, that would have taken months.

Working through the remediation in batches, the workflow scanned for injections in both site files and the database, removed malware, deleted inactive and migration plugins, updated and reinstalled plugins and themes, and reinstalled WordPress core. Results were verified at each step before moving to the next batch. The entire response was managed by a single WordPress developer, internal stress stayed low, and other work continued.

“Had we not had the Pressable MCP connection, we would have had to put a lot more resources on it, and the resolution would have taken much longer,” said Joshua Kraus, Product Manager, Websites.

The team is now building automated maintenance workflows using Pressable MCP to handle plugin and core updates on a regular schedule, shifting the focus from incident response to incident prevention.

[Read the full Spotzer Digital case study →]

WebLogic: A €1,500/Year Tool Replaced. 5x Output. 

Jack O’Connor founded WebLogic in 2020 to build bespoke, high-quality WordPress experiences for clients across Ireland and the UK. As the team grew to seven people managing 100 sites on Pressable, each with its own staging environment, the operational surface expanded fast. WPMU DEV alone was costing approximately €1,500 per year, and the team was spending too much time on QA, reporting, and project scoping.

Since connecting Pressable MCP, the team has replaced WPMU DEV entirely with custom-built plugins that pull site data via MCP into HubSpot for automated monthly client reports. They’ve built a library of standard operating procedures inside ClickUp that Claude reads and executes, identifying which SOP applies to a site, then assigning the right task to the human team. Project scoping and brief preparation dropped from hours to minutes.

Jack estimates a 5x increase in operational output. Bespoke plugin work that previously required months now delivers in days or weeks. A complex data migration that would have taken weeks of developer time was handled in a fraction of that.

“We’re delivering bespoke work at a speed and quality level that would have required a much larger team before. That’s what Pressable MCP makes possible,” O’Connor said.

[Read the full WebLogic case study →]

MAXBURST: A 200-Site Portfolio Audited in Under 45 Minutes

MAXBURST is a New York-based digital agency with over 20 years of experience building websites and marketing solutions for clients in manufacturing, aerospace and defense, B2B industrial, and engineering. Managing a 200+ site portfolio across those sectors meant real operational friction: every diagnostic required logging into individual dashboards, every update meant repeating the same steps across dozens of environments, and security audits consumed developer time without delivering anything new for clients.

The team didn’t wait for an official integration to start building. Before Pressable MCP launched, MAXBURST was already constructing workflows on top of Pressable’s infrastructure. When MCP became available, they moved fast, building custom playbooks and internal automations that run directly through structured prompts across their entire portfolio.

The clearest example is a fleet-wide performance audit for a manufacturing client whose network of product microsites had accumulated legacy caching issues, oversized database tables, and compounding technical debt. Working through Pressable MCP, the team scanned every site, identified the bottlenecks, cleared the bloat, and re-optimized configurations across the entire network in a single session. The same workflow had previously taken 6-8 hours per site, covering Core Web Vitals diagnostics, database reviews, and caching layer adjustments. With Pressable MCP, the full fleet audit completed in under 45 minutes, a reduction of more than 90%.

Security management follows the same pattern. The team can now run compromise audits, rotate credentials and salts, and generate vulnerability reports covering every active plugin across all client sites in one pass. When a client hits a white screen or a 500 error, MAXBURST pulls logs, isolates the issue, and deploys a fix without touching individual site dashboards. Critical incidents that previously took one to two hours to resolve now close in under 15 minutes. Across the team, MCP workflows have reclaimed approximately 20+ developer hours per week.

“If we had to manage this manually, scaling would be impossible. Pressable MCP has enabled us to operate like a true enterprise-level agency, delivering the speed, reliability, and technical depth our clients expect,” said Andrew Ruditser, Co-Founder and Lead Technology Coordinator.

[Read the full MAXBURST case study →]

Turf Masters Brands: A 36-Site Portfolio Under Control After Day One

Turf Masters Brands is one of the largest lawn care companies in the United States, serving more than 380,000 customers annually across 20+ states through a growing portfolio of regional brands. The company grows through acquisition, which means every new brand brings a website and infrastructure that doesn’t match what’s already there.

Christopher Brown stepped into the web and digital lead role and immediately had to manage 17 Pressable sites, with 14 more migrating over, five non-WordPress properties to convert, and a mandate to get everything onto a standardized configuration. His primary tool from day one: Pressable MCP.

Using simple prompts, Christopher can pull a list of all plugins that need updates across his Pressable portfolio, instruct Claude to back each site up, run the updates, and report back, without touching a single dashboard manually. He built a centralized site dashboard pulling live data from Pressable via API, with the first working version done in three days. When a new acquired site comes in, MCP gives him immediate visibility into how it compares to the rest of the portfolio and what needs to change.

“I can’t lose anything that MCP offers right now because it’s the only thing keeping my head above water working with 36 websites and trying to get them under one roof,” Brown said.

He compared it to MCP servers he’d used at other hosts: “WP Engine doesn’t even have an MCP server, and that is crazy to me. Pressable does plugins, themes, core, traffic, all metrics. I can tie into all of it.”

[Read the full Turf Masters Brands case study →]

What These Teams Have in Common

Seven teams. Seven completely different use cases. The underlying pattern is consistent: Pressable MCP turns hosting infrastructure from a place you manage through a dashboard into a capability your AI can operate.

The teams getting the most out of it are running lean, one person, a team of seven, a team of 25, managing portfolios that would normally require far more headcount. They’re using MCP as an operational layer, and it’s letting experienced people take on more without adding staff.

That’s what good hosting infrastructure does. It gets out of the way and makes everything around it faster.

Ready to see what Pressable MCP can do for your team? Learn more at pressable.com/mcp

Suzanne Kolpakov

Suzanne leads Product Marketing at Pressable, where she focuses on translating complex hosting technology into clear, empowering solutions for creators and businesses. Driven by a passion for the WordPress community, she strives to show how the right platform can be a catalyst for growth and innovation. Suzanne believes that great marketing starts with authentic storytelling and making high-performance tech feel accessible to everyone. She lives in the Metro Atlanta area with her two children and two cats. When she’s not scaling the Pressable brand, you’ll find her navigating the local trails or enjoying the vibrant energy of the South.